• TOOL TIME: JIS Drivers

    The whole point behind the Tool Time articles is to talk about tools that a g-shockaholic should have at hand. Basically what you would need for DIY jobs that can easily be done at home, with just a few and inexpensive tools. On my last article I wrote about drivers in general, and said that the first set of drivers you should get was a good Phillips head set. Well, that's only partially true.

    In my defense, I didn't lie, you do need a good quality Phillips head drivers set, but you can't forget that Casio is a Japanese brand. And being Japanese, they generally use Japanese Industrial Standards (JIS) tools, instead of SAE International that we westerners are used to. A JIS and a SAE Phillips driver will look exactly the same from a distance, but there is a very small (but important!) difference in the shape of the head:


    Both are #1 Phillips head, but the one on the left is the SAE driver and the black one on the right is the JIS driver. If you look closely, you'll notice that the JIS head is a bit "shallower" then the SAE driver, but they have the same exact thickness. JIS screws have a more shallow groove on their heads, so a JIS driver will fit a little better then if you use a SAE driver.

    As a general rule, Casio never overtightens their screws, so you normally can remove the JIS screw with a regular SAE driver. When you tighten the screw in place, since you should NOT over-tighten them, you can also use the SAE driver, no problems at all. However, things get tricky when you're talking about vintage or even abused models. In many cases the screws get stuck in the hole because of oxidation of the threads, and then you have to put some muscle to loosen them. And that's when it's invaluable to have a JIS set of drivers. Remember "You should use the right tool for the right job"?


    I bought a set (#1, #0, #00 and #000) from Moody, a brand that I wasn't familiar with at the time but after using for around six months I can say I trust. Their tools are top notch, almost in the same league as Wiha, and like Wiha, are affordable and not hard to find on eBay. Just like with the SAE drivers, you only need the #00 and #000 drivers, so if you buy a set be sure that it has these two sizes.

    If you're working on an old model, it's much safer to use a JIS driver, because the head will fit better in the screw head. Therefor, if the screw is a bit frozen, you can better apply more force with less chances of striping the head of the screw. And trust me, you DO NOT want to strip the head of one of those itsy-bitsy screws!

    As I said earlier, for current/new models a regular SAE driver will work flawlessly, but if you're going to work on a watch that even has the remote possibility of the screw in question being stuck, go for a JIS driver. The headache and hassle of fixing a stripped screw is much greater then the price that you will pay for a set of JIS drivers.

    By Luciano U. Werner
    Comments 4 Comments
    1. rutteger's Avatar
      rutteger -
      Another great article LUW, thanks
    1. LUW's Avatar
      LUW -
      You're more then welcome!
    1. Sengyoku's Avatar
      Sengyoku -
      Thumbs up Luciano! I have to say you were the direct inspiration for me getting a set of Moody JIS drivers (from the same guy you got your set from probably lol)... just around the time I accidentally stripped a screw, wondering why I never got a perfect fit on it... but your expert tool-know-how sure came to the rescue!

      Anyway, I think this is EXTREMELY important and useful information for all G-shock and modding enthusiasts especially. I think there are still many out there unwittingly using their phillips drivers without knowing about JIS :/
    1. LUW's Avatar
      LUW -
      Thanks Sengyoku!
      I'm happy to see you guys spending money because of me (and not the other way around) for a change .

      Seriously though, if you want to get serious about taking Gs apart (specially the vintage ones) a JIS set is a must.
  • Adverts

  • New Forum Posts

    Deepsea_Dweller

    WRUW Monday 14 - Sunday 20 August 2017

    Great weekend gents 🐬😎



    Sent from my iPhone 7+

    Deepsea_Dweller Today, 00:43 Go to last post
    ccm123

    WRUW Monday 14 - Sunday 20 August 2017




    Sent from my iPhone using Tapatalk

    ccm123 Yesterday, 20:56 Go to last post
    Deepsea_Dweller

    WRUW Monday 14 - Sunday 20 August 2017




    Sent from my iPhone 7+

    Deepsea_Dweller Yesterday, 12:22 Go to last post
    DW-5000

    WRUW Monday 14 - Sunday 20 August 2017

    Lunchtime GA-201

    DW-5000 Yesterday, 10:52 Go to last post
  • Right now on eBay

  • G-Shockzone Social Media

  • Follow G-Shockzone